Cotton Powder Coating
1.General Introduction:The cotton powder coating can be both used for indoor and outdoor. This product has a unique decorative effect luxurious appearance. It can help cover up the defects of the substrate.
You need to pay attention to two points. First, since the products contain metallic pigments, when using an electrostatic gun construction should ensure that the system is well grounded, while setting a lower amount of static voltage and flour, to prevent sparking phenomenon when spraying. Second, in order to improve the decorative and overcome the metal coating easy to clean off the paint, we recommend to use the transparent powder coatings to carry varnish.
2.Product seiers:
We provide sand grain, hammer, silk stripes, marbling, metal and other effects of the product appearance. And we can offer a variety of shiny products based on user demand.
3.Powder physical properties:
Proportion :1.2-1.8 (depending on the color and gloss )
Particle size distribution: 100% less than 100 microns (depending on the
specific indicators art effects ) .
specific indicators art effects ) .
Liquidity :120-140
4.Average coverage:
6-10m3/kg, the membrane is 60μm(calculate by 100% utilization rate of powder coating).
5.Packing:
Carton packaging, lined with double polyethylene bag, net weight 20 kg.
6.Storage requirements:
Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
7.Health and safety:
This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
8.Coating performance
4.Average coverage:
6-10m3/kg, the membrane is 60μm(calculate by 100% utilization rate of powder coating).
5.Packing:
Carton packaging, lined with double polyethylene bag, net weight 20 kg.
6.Storage requirements:
Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
7.Health and safety:
This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
8.Coating performance
Coating performance | ||||
Test items | Inspection standards | Test indicators | ||
Impact resistance | ISO6272 | GB/T1732-1993 | 30-50kg/cm | |
Cupping test | ISO1520 | GB/T9753-1988 | 6mm | |
The adhesion (grid method) | ISO2409 | GB/T9286-1998 | 0 | |
Bending | ISO1519 | GB/T6742-1986 | 3mm | |
Pencil Hardness | ASTMD3363 | GB/T6739-1996 | 1H-2H | |
Salt spray test | ISO7253 | GB/T1771-1991 | >500 hours | |
Damp heat test | ISO6270 | GB/T1740-1979 | >1000 hours | |
Annotate: | 1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns. | |||
2.The above coating performance may be lower as shiny and slightly lower. |
9.Why choose our products?
1). We have our own factory. The good quality and the competitive is the advantage of our company.
2). The material we choose is always good and products always come out with high quality.
3). A trial order or sample orders are welcomed.
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
5). We will do our best to service you all the time if you have the further question.