| Galin/Gema Matel/Plastic Powder Coating/Spray/Paint Machine (OPTFlex-F) |
it is suitable for complex and high quality workpiece,can be used with Metal Powder
 | GALIN POWDER COATING MACHINE (OPTFLEX-F) DIMENSIONS WIDTH: 690MM DEPTH: 800MM HEIGHT: 1135MM WEIGHT: 49KG |
| GALIN POWDER COATING MACHINE (OPTFlex-F) ELECTRICAL DATA | |
| Nominal input voltage | 110V240VAC |
| Frequency | 50-60Hz |
| Connected load (without vibrator) | 140 VA |
| Nominal output voltage (to the gun) | eff.10 V |
| Nominal output current (to the gun) | max. 1.2 A |
| Connection and output for vibrator (on Aux output) | 110/230 VAC max. 100 W |
| Connection for rinsing function (valve) | 24 VDC max. 3 W |
| Temperature range | 0°C - +40°(+32°F - +104°F) |
| Max. surface temperature | 120 °C (+248 °F) |
| Approvals | II 3 D IP54 120 °C |
| GALIN POWDER COATING MACHINE (OPTFlex-F) PNEUMATICAL DATA | |
| MAX.input pressure | 10bar/145psi |
| MIN.input pressure | 6bar/87psi |
| Max.water vapor content of the compressed air | 1.3g/Nm³ |
| Max.oil vapor content of the compressed air | 0.1mg/Nm³ |
| Max.compressed air consumption | 8Nm³/h |
| GALIN POWDER COATING MACHINE (OPTFlex-F) PROCESSIBLE POWDER | |
| Plastic Powder: | √ |
| Metallic Powder: | √ |
| Enamel Powder: | × |
Galin powder coating machine can be used for Hub
Galin powder coating machine can be used for Furnitur
Galin powder coating machine can be used for Metal Rail
Galin powder coating machine can be used for Metal products
Galin powder coating machine can be used for Glass products
Galin powder coating machine can be used for Metal or Glass Cup
Galin powder coating machine can be used for Any Metal or Glass you want
Galin powder coating machine can be used for Furnitur
Galin powder coating machine can be used for Metal Rail
Galin powder coating machine can be used for Metal products
Galin powder coating machine can be used for Glass products
Galin powder coating machine can be used for Metal or Glass Cup
Galin powder coating machine can be used for Any Metal or Glass you want
Galin Matel/Plastic powder coating machine (OPTFlex-F) can be used for Metal Powder
Galin Matel/Plastic powder coating machine (OPTFlex-F) can be used for Complex Piece
CLEANING AND MAINTENANCE OF POWDER COATING MACHINE
(OPTFLEX-F)
(OPTFLEX-F)
- Daily Maintenance
1. Clean the injector
2. Clean the powder gun
3. Clean the powder hose and suction unit
2. Clean the powder gun
3. Clean the powder hose and suction unit
- Weekly Maintenance
1. Clean suction unit,injector,Powder Clean module and powder gun
2. Check the control unit grounding connections to the coating booth bolts,
the suspension devices of the work pieces,or the conveyor.
TROUBLESHOOTING GUIDE OF POWDER COATING MACHINE(OPTFLEX-F)
If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
2. Check the control unit grounding connections to the coating booth bolts,
the suspension devices of the work pieces,or the conveyor.
TROUBLESHOOTING GUIDE OF POWDER COATING MACHINE(OPTFLEX-F)
If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
| Error/cause | Troubleshooting |
| Injector nozzle, non-return valve unit, powder hose or powder gun are clogged | Clean the corresponding parts and if necessary,replace them |
| Conveying vacuum too low | Increase the powder quantity and/ or total air volume on the control unit |
| Insert sleeve worn , not or incorrect inserted | Replace or insert it ,observe the indexing cam |
| Insert sleeve is worm after a short operating duration | Clean the nozzle ,if damaged,replaced it |
| The gun does not spray powder although the control unit is switched on and the gun trigger is pressed | 1.Connect the machine to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |